The Bondage Bed

This is not furniture that suggests what might happen. It tells you exactly what will happen. 

What the Bed Does

• Cage Underneath: The sub goes in the cage. 76" long, 54" wide, 22" high. Door opens 27.75" wide, 20.5" tall. They are in there until you decide otherwise.
• O-Ring Attachment Points on All Sides: Hooks run along all four sides of the frame and across the canopy. Clip restraints, suspension gear, impact implements, or any O-ring compatible BDSM kit to any point around the bed.
• Canopy with 220lb Hanging Capacity: Four chains overhead rated to 220lb total. Hang spreader bars, suspension cuffs, sensory gear, whatever the scene calls for.
• Interchangeable Slats: Swap the bed surface to change the scene. The head hole slat locks your sub face down with their head through the opening and completely clear of what is happening above them.
• Milking Table Configuration: With the head hole slat in and the sub caged below, access to the sub runs through the frame from underneath. This bed works as a milking station without adding a single piece of extra furniture.
• 1100lb Bed Capacity: Built for real use. The frame holds 1100lbs on the sleep surface.
• Industrial Black Steel: Minimalist design that looks intentional in a playroom and serious anywhere it goes up.

The Submission Bed is the kind of piece that changes a room the moment it goes up. Seven feet of industrial black steel, a full canopy rising 78 inches overhead, and a cage built into the base that your sub crawls into and stays in. The bed is 79 inches long and 57 inches wide. The cage underneath runs 76 inches long, 54 inches wide, and 22 inches high, with a door that opens 27.75 inches wide and 20.5 inches tall. Big enough to hold a full-grown man on his hands and knees. Too short for him to stand up or change his mind.

O-ring attachment points run along all four sides of the bed frame and across the full canopy overhead. Every hook point is a new scene. Cuffs clipped to the frame keep your sub pinned flat on the bed surface. Chains dropped from the canopy suspend whatever you want at whatever height you want. The interchangeable slats change what the surface does entirely. Swap in the head hole slat and your sub lies face down with their head locked through the opening, face completely out of the way while you work the rest of their body from above. That same head hole configuration doubles as a milking position when the sub in the cage below reaches up through the frame, with access to everything you leave hanging through the slats.

The canopy holds 220lbs of hanging weight distributed across four chains. The bed surface holds over 1100lbs. This is not a prop. It is rated equipment. The industrial minimalist black steel frame looks like it belongs in a serious playroom because it does.